Fast, Reliable Chimney Liner & Rebuild Across Artesia
Chimney liner replacement and rebuild services in Artesia typically cost between $2,800 and $7,500 depending on whether you need a stainless steel liner install, partial rebuild, or full chimney reconstruction. Most of our Artesia customers get same-day or next-day scheduling, and our Chimney Liner & Rebuild team completes the majority of jobs in a single visit. If you’re calling from a 1960s or 1970s tract home off Pioneer Boulevard or near Artesia Park, you’re probably dealing with an original clay tile flue liner that’s been sitting cold and deteriorating for decades. That’s our specialty. Call (844) 418-0954 and a live person will answer, 24 hours a day.
Why Hearthstone Chimney Co. of Los Angeles Is Artesia’s Preferred Chimney Liner & Rebuild Company
We’ve been serving Artesia and surrounding communities for over 42 years, and in that time we’ve worked on hundreds of chimneys in the 90701 and 90702 ZIP codes. Our technicians know the difference between a home built in 1958 off 183rd Street and one built in 1972 near Bloomfield Avenue, and they know what each era’s chimney construction typically hides.
Our reputation here is built on documentation. Every inspection ends with photos you can see and a plain-English verdict. No jargon, no scare tactics. The 90-Day Done Right Promise backs every job in writing, with no arguing and no paperwork chase. If it’s not right, we come back.
Response time to Artesia is typically same-day or next-day. We’re based in Los Angeles and our routes through the Gateway Cities put us on your doorstep quickly. Background-checked, uniformed technicians arrive when we say we will. No-hassle upfront pricing means the number on the estimate is the number on the invoice.
Gil Mercer, our owner, has built this company on a simple standard: Krafted right, Every time, Your home first, Standing behind it. That’s the K.E.Y.S. code, and it governs every chimney we touch in Artesia.
Our Chimney Liner & Rebuild Services in Artesia
Stainless Steel Liner Installation
Artesia’s original clay tile flue liners, installed in homes built from the late 1950s through the 1970s, were never meant to last 60 years without maintenance. We install DuraFlex stainless steel liners that slip inside the existing flue, creating a sealed, corrosion-resistant passage for smoke and gases. A stainless steel liner install in Artesia typically runs $2,800-$4,200 for a standard fireplace flue. The job takes one day in most cases. We size the liner to your appliance, whether it’s a wood-burning fireplace, gas insert, or heating appliance, and we document the before-and-after with photos.
Flexible Liner Solutions
Some Artesia chimneys have offsets, bends, or tight clearances that rigid stainless steel can’t navigate. For these, we use flexible liners that conform to the chimney’s interior shape without compromising draft performance. Flexible liner installation in Artesia homes with offset flues typically costs $3,200-$4,800. This is common in split-level tract homes near Carmenita Road where chimney construction had to work around rooflines and interior walls.
Liner Replacement
When a clay tile liner has cracked, spalled, or collapsed beyond repair, full liner replacement is the only safe option. In Artesia, we see this most often in homes where the chimney has sat unused for 15 or 20 years, allowing moisture from coastal humidity to degrade the mortar joints between tiles. Liner replacement in Artesia ranges from $3,500-$5,500 depending on flue height, accessibility, and whether the smoke chamber needs parging. We remove the damaged liner, inspect the surrounding masonry, and install a new system that meets current NFPA 211 standards.
Partial Chimney Rebuild
Not every failing chimney needs to come down to the roofline. Partial rebuilds address specific damage: the crown, the top few courses of brick, the firebox walls, or the smoke chamber. In Artesia’s post-war housing stock, partial rebuilds are often the right choice when the lower chimney structure is sound but the upper portions have suffered from water intrusion and animal damage. A partial rebuild in Artesia typically costs $3,800-$6,500. We match existing brick and mortar where possible, and we always rebuild the crown with proper slope and overhang to shed water.
Full Chimney Rebuild
When the entire chimney structure has compromised integrity, settling, or extensive spalling, a full rebuild is the only responsible path. This is more common in Artesia than many homeowners expect, given how long these chimneys have sat neglected. A full chimney rebuild in Artesia runs $6,500-$12,000 depending on height, brick matching, and whether the fireplace and firebox are included. We dismantle carefully, salvage what we can, and reconstruct to current code with proper clearances, a new liner system, and a crown built to last.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Artesia
We work exclusively with professional-grade materials from brands that stand behind their products: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. For Artesia homeowners, this means we stock common liner diameters and fittings locally, so we’re not ordering parts and making you wait. A DuraFlex stainless steel liner carries a lifetime warranty when properly installed. HeatShield cerfractory resurfacing products let us restore smoke chambers and flue walls without full tear-out when the damage is surface-level. We match the material to the problem, and we explain why in plain English before we start.
Common Chimney Liner & Rebuild Problems We See in Artesia Homes
- Original clay tile liners from the 1960s crack and spall due to years of moisture absorption from coastal humidity, creating gaps that allow heat and gases to escape into the attic. In Artesia, this damage is driven by disuse, not heavy burning. The tiles absorb moisture, freeze slightly on the coldest winter nights, and gradually deteriorate.
- Mortar joints in the flue tiles degrade from lack of use, leading to sections collapsing inward when a fire is finally lit after many years. We’ve pulled out loose tiles in Artesia homes where the homeowner hadn’t burned a fire since the 1990s.
- Animal nests block the flue entirely, and when removed, they often reveal underlying liner damage that was masked by the debris. Artesia’s mild climate and extended no-burn periods make chimneys attractive nesting sites for house sparrows, barn owls, and roof rats.
- Crown and cap failure allows water directly into the flue system, accelerating damage to everything below. In Artesia’s coastal-influenced climate, even small crown cracks widen quickly as moisture expands and contracts in the masonry.
Pricing for Chimney Liner & Rebuild in Artesia, CA
Here’s what Artesia homeowners can expect for common chimney liner and rebuild services:
| Service | Typical Range in Artesia |
|---|---|
| Stainless steel liner installation (standard flue) | $2,800 - $4,200 |
| Flexible liner installation (offset flue) | $3,200 - $4,800 |
| Full liner replacement with removal | $3,500 - $5,500 |
| Partial chimney rebuild | $3,800 - $6,500 |
| Full chimney rebuild | $6,500 - $12,000 |
| Level-2 camera inspection with documentation | $289 - $389 |
What moves the price: flue height and accessibility, whether the smoke chamber needs parging, the condition of the existing masonry, and whether we need to match specialty brick. We provide no-hassle upfront pricing after inspection. The number on the estimate is the number on the invoice. Call (844) 418-0954 for a free estimate. We also offer $50 off any repair over $250, a permanent 5% senior and veteran discount, and free second opinions on any written estimate.
We Also Serve Cities Near Artesia
Our Chimney Liner & Rebuild in Artesia routes also cover Cerritos, La Palma, Hawaiian Gardens, and Norwalk. If you’re in a neighboring city with similar post-war housing stock and aging chimney systems, the same expertise and pricing structure apply.
Serving Artesia, CA - Our Local Coverage Area
We’re based in the Artesia area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Liner & Rebuild in Artesia
Most 1960s Artesia homes need a liner replacement, not a full rebuild, if the exterior masonry is sound and the chimney isn’t leaning or settling. We determine this with a Level-2 camera inspection that shows us the flue interior, the smoke chamber, and the firebox walls. If the brickwork and mortar joints in the chimney structure are intact, a stainless steel liner installed inside the existing flue is the right fix. Call (844) 418-0954 and we’ll inspect it properly before recommending anything.
No, don’t light a fire until a professional inspects the flue. In Artesia, chimneys that have sat idle for years commonly contain animal nests, debris, or deteriorated liner tiles that can block the flue or allow heat and gases into wall cavities. Our technicians find active nests in unused Artesia chimneys regularly, especially after the first cold snap of December or January. Schedule a Level-2 inspection for $289-$389 and we’ll give you a clear verdict with photos.
We primarily install DuraFlex stainless steel liners in Artesia homes, with HeatShield cerfractory products for smoke chamber resurfacing when appropriate. Both carry strong manufacturer warranties and are listed to UL 1777 standards. We don’t use builder-grade substitutes. The specific brand and model depend on your appliance type, flue dimensions, and whether your chimney has offsets. We’ll show you exactly what we’re proposing and why.
Clay tile liners from the 1970s in Artesia are typically at or past the end of their service life, and repair is rarely practical. Cracked or spalled tiles cannot be patched reliably, and missing mortar joints between tiles create hazardous gaps. We replace them with a continuous stainless steel liner that seals the entire flue path. Replacement is the standard of care for 50-year-old clay tile in Artesia’s climate. Call (844) 418-0954 for an inspection and we’ll show you exactly what we’re seeing.
Watch for pieces of tile or mortar in the firebox, visible cracks in the flue walls when you look up from the hearth, smoke drafting poorly into the room, water stains on interior walls near the chimney, or a strong musty odor from the fireplace. In Artesia’s post-war tract homes, liner failure often shows up as animal activity or water damage rather than creosote issues. Any of these signs means it’s time for a professional inspection. We document everything with photos and give you a plain-English verdict. Estimates are free.
Ready to get your Artesia chimney inspected or repaired? Call Hearthstone Chimney Co. at (844) 418-0954. A live person answers 24 hours a day, 7 days a week. We’ll schedule your free estimate, honor our $50 off repair over $250 offer, and back every job with the 90-Day Done Right Promise in writing. Done right, and we stand behind it.
Written by Gil Mercer, Owner at Hearthstone Chimney Co., serving Artesia and local communities since 1984.